Turn awkward spaces or open areas into a private room with our Mounted Straight Partition Wall With Swing Door. Whether you’re converting a den into a functional room or creating privacy in a shared space, this sleek, modern, modular wall with a swing door provides a real-wall feel with added privacy.

To assemble, simply screw the included Wall Mounting Bracket into your existing wall before nesting the lightweight panels into the bracket. From there, it's as simple as inserting connectors into the receiving holes on each panel and snapping the panels together like life-sized puzzle pieces!

Need a custom size? Contact Us via live chat, email, or phone!

Wall + Anchor Panels
Our signature Wall and Anchor Panels are 3” thick and made of Moisture and Impact Resistant Fiberglass. For Wall Dividers that require half-foot width increments, 12” wide perpendicular return wall panels are added to achieve the desired width. All Wall and Anchor Panels snap together easily using Lug and 2-Way Connectors for a stable and secure fit.

Wall Mounting Brackets (x2)
The Wall Mounting Brackets allow you to easily attach your new Wall Divider to your existing walls. Made of PVC, the bracket is designed to be strong yet flexible and easy to drill into.  Simply drill two holes through the bracket into your wall, insert the included screws, nest the panels into the corner of the bracket, and add two more screws into the side of your panels. For detailed instructions, see the "assembly" tab above.

Swing Door Kit
The included swing door kit provides a more premium, real-wall feel with increased privacy compared to our accordion door option.

The door itself is 32” wide and 80” high, with modular wall panels above the door to match the height of your wall kit. The complete door module measures 48” in width.

By default, the door is placed on the width of the wall in the most economical position. If you have a special request for the door placement, reach out to us, and we can customize the kit to match your requirements (additional costs may apply).

Lug and 2-Way Connectors
Included connectors are easily snapped into the panels, creating an ultra-secure connection between panels from all sides. These connectors allow you to connect panels to each other in seconds, making for easy assembly. 

Finishing Caps
Finishing caps are used to close off any exposed connector holes, giving the exterior of your wall a clean, finished look! Your kit includes enough caps to seal off the entire perimeter of your wall.

Because this model is attached on both sides to your existing walls, you'll want to measure your space. 

1. Ceiling height: Your ceiling should be at least 2 inches higher than the height of the wall you're purchasing.

For example, if you’re purchasing an 8’ wall, your ceiling should be at least 8’2” to allow for easy installation. Fitting an 8’ wall under an 8’ ceiling will be very difficult without a small gap.

2. Wall-to-wall width: The included wall mounting brackets are 3"x3" wide. This gives you around 3" of leeway (1.5" on each side) when it comes to the maximum width of your space from wall-to-wall.

For example, if you're looking at the 138" wall kit, the wall-to-wall width of your space can be anywhere between 138"-141".

3. Floor width: The width of your room along the floor (from the inside of the baseboard on each side) should be no less than the width of the wall you're purchasing.

For example, if you're looking at the 138" wall kit, from baseboard-to-baseboard should be no less than 138".

Do also make sure to check your floor for dips and bulges. Uneven flooring can impact the installation of your product.

Door Positioning
By default doors are placed in the most economical position. If you have a preference for the placement of the door, please reach out to us, and we can check if that is possible with your dimensions, or if we can do a custom order for you. 

Have a question about measurements? Your space doesn't seem to fit any of our available sizes? Contact us, we probably have a custom configuration that works for your space!

Our wall kits are designed to be completely DIY. Two people can typically assemble and install any of our wall kits in 90 minutes or less*, with little to no tools needed. 

Note that a drill and/or screwdriver is recommended for mounting the wall kit to your existing walls. 

• Video Assembly Guide (link)
• PDF Assembly Guide (link)
  

If you have any questions regarding assembly feel free to give us a call on (855) 348-4330, email us at hello@diyversify.com or send us a chat right here on our website. We are available Monday-Friday 9AM to 5PM (est).

*Depending on the size of your wall kit