Overhead view of T-shaped modular partition wall room divider with doors that separates main room from two smaller rooms in boho living room
Boho living room with large plants and luxury lighting, with a partition wall that divides the living room into three separate rooms
Boho living room with hardwood floors and luxury lighting, with a partition wall that divides the room with accordion doors and white modular wall panels
Mounted T-Shaped Partition Wall With Doors
Mounted T-Shaped Partition Wall With Doors
Mounted T-Shaped Partition Wall With Doors
Mounted T-Shaped Partition Wall With Doors
Mounted T-Shaped Partition Wall With Doors
Mounted T-Shaped Partition Wall With Doors
Mounted T-Shaped Partition Wall With Doors
Overhead view of T-shaped modular partition wall room divider with doors that separates main room from two smaller rooms in boho living room
Boho living room with large plants and luxury lighting, with a partition wall that divides the living room into three separate rooms
Boho living room with hardwood floors and luxury lighting, with a partition wall that divides the room with accordion doors and white modular wall panels
Mounted T-Shaped Partition Wall With Doors
Mounted T-Shaped Partition Wall With Doors
Mounted T-Shaped Partition Wall With Doors
Mounted T-Shaped Partition Wall With Doors
Mounted T-Shaped Partition Wall With Doors
Mounted T-Shaped Partition Wall With Doors
Mounted T-Shaped Partition Wall With Doors

For the first time ever, you can easily convert a single space into three distinctly separate rooms, with our exclusive T-Shaped Partition Wall With Door kit. The T-Shaped Kit consists of a single wall down the middle, connected to a wall that spans the width of your space, and includes two easy-to-install accordion doors. 

Need to create some space, without going through an entire renovation? Look no further. This kit is the perfect way to add value to any space, creating entirely new rooms without undergoing traditional construction or renovations. 

Each section of the partition is mounted to your existing wall using included Wall Mounting Brackets. This makes for three points of contact and keeps the entire system secure. With just two screws needed per bracket, the entire partition is secured and leaves a minimal effect on your existing walls. When the partition is disassembled or uninstalled, the small screw holes are easily patched and painted as though they were never there!

Say goodbye to drywall, dust, noise, and debris, and assemble the space you need today.

Wall Panels

Your kit includes our signature wall panels that are 3" thick and made of Moisture and Impact Resistant Fiberglass. These panels range from sizes 4'x4'-3'x1' and snap together using included connectors for an ultra-secure two-way connection.

Accordion Door Kit (x2)

The included accordion door kit is 36" wide, and either 84" or 96" in height, depending on the height of the partition you purchase. The kit comes with a specialized lintel, that includes a track for the accordion door. Simply slot the folding door into the track and install it between two panels, locking the lintel and door into place using the lug or 2-way connectors. Each door includes two thresholds, a double-sided handle, and three integrated magnets to hold the door in position when closed.

Wall Mounting Brackets 

The Wall Mounting Brackets make it easy to anchor the partition to your existing walls keeping the entire partition safely secured. When removed, the only marks left on your walls are the small holes from the screws, allowing for easy filling and painting.

To mount, screw the bracket to the fixed wall, nest the panel inside the L, and screw the bracket to the panel. Detailed instructions on this can be found in the "Assembly" tab above.

Lug and 2-Way Connectors

Included connectors are easily snapped into the panels, creating an ultra-secure connection between panels from all sides. These connectors allow you to connect panels to each other in seconds, making for easy assembly. 

Finishing Caps

Finishing caps are used to close off any exposed connector holes, giving the exterior of your wall a clean, finished look! Every kit includes enough caps to seal off the exposed perimeter of your wall. Finishing caps for the top are not included. Extra finishing caps can be added from our Accessories page.

Because this model is attached on both sides to your existing walls, you'll want to measure your space.

1. Ceiling height: Your ceiling should be at least 2 inches higher than the height of the wall you're purchasing.

For example, the minimum ceiling height for the 8' wall to be assembled comfortably is 8'2". Do not try to fit an 8' wall under an 8' ceiling, without a small gap it will be impossible!

2. Wall-to-wall width: The included wall mounting brackets are 3"x3" wide. This gives you around 3" of leeway (1.5" on each side) when it comes to the maximum width of your space from wall-to-wall.

For example, if you're looking at a kit that's 14' wide, the wall-to-wall width of your space should be between 14'-14'3".

3. Floor width: The width of your room along the floor (from the inside of the baseboard on each side) should be no less than the width of the wall you're purchasing.

For example, if you're looking at a kit that is 14' wide, from baseboard-to-baseboard should be no less than 14'.

Do also make sure to check your floor for dips and bulges. Uneven flooring can impact the installation of your product.

Have a question about measurements? Your space doesn't seem to fit any of our available sizes. Contact us, we probably have a custom configuration that works for your space!

Our wall kits are designed to be completely DIY. Two people can typically assemble and install any of our wall kits in 90 minutes or less*, with little to no tools needed. 

Note that a drill and/or screwdriver is recommended for installing the accordion doors and mounting the wall kit to your existing walls. 

If you have any questions regarding assembly feel free to give us a call on (855) 348-4330, email us at hello@diyversify.com or send us a chat right here on our website. We are available Monday-Friday 9AM to 5PM (est).

*Depending on the size of your wall kit

Shipping

Orders ship from local warehouses and are typically delivered in 5-15 business days. After you place your order, you will receive a confirmation email. Once your order is processed and shipped, you will receive tracking info via email.

Our modular wall kits are shipped via freight on a pallet and delivered curbside. You’ll be contacted 1-2 days prior to delivery to schedule a time, and a signature is required.

When the courier arrives, they will lower the pallet to the ground at the curb or driveway, and you’ll be responsible for moving the panels inside and disposing of the packaging and pallet. Accessories may arrive separately as regular parcels.

If you have any questions about shipping (or anything else), feel free to contact us via live chat, phone or email.

*Free shipping available to the Contiguous United States. Excludes Alaska, Hawaii, and U.S. Territories.

Returns
Please see our Return Policy.

Warranty
This product is guaranteed by a Two Year Warranty. 

What is the difference between "Freestanding" and "Mounted" wall kits?
Freestanding Wall Kits stand securely on their own without the need for attachment to your existing walls, leaving no marks when removed. Anchor panels at each end provide stability.

Mounted Wall Kits are secured to your existing walls using the included mounting brackets and a few screws on each end. This option provides maximum stability, making it ideal for more permanent or secure installations.

I don't find my dimensions? Can you do custom orders?
Yes, we offer custom orders with width and depth options in 3-inch increments and height options in 1-foot increments, up to a maximum of 10 feet. Please fill out our Custom Quote Form, and we’ll provide a free custom quote within 24 hours.

Alternatively, you can reach us by email (hello@diyversify.com), chat, or phone at 855-348-4330 for assistance with your custom request.

Can the L-shaped or F-shaped walls turn in any direction?
Yes, our L-shaped and F-shaped wall kits can be connected in any direction, so the layout is fully interchangeable to fit your space.

Can the doors be locked?
The swing doors come with a standard lock and key. The accordion doors do not include locks, but many customers choose to add their own hasp locks for security.

Can I hang pictures or shelves on the walls?
Yes, the panels are stable enough to hang pictures, paintings, and even decorative shelves, making them great for gallery or display walls. You can drill into the panels for mounting screws or use wire loops around lugs at the top of the wall. However, we recommend avoiding heavy items or anything that projects too far from the wall, as this could create a weight imbalance.

Can I choose where the door is placed?
By default, doors are placed in the most economical position. If you have a preference, let us know, and we can check if it’s possible with your dimensions or arrange a custom order. Please note, doors need at least 1 foot of wall panel on each side.

Do you offer financing?
Yes, we offer financing through our partner Breadpay. You can learn more and apply here: Financing Options.

How does mounting work?
Our mounted wall kits include 4-foot-long wall mounting channels, which are secured to your existing walls and each end of the Diyversify walls with a few screws, ensuring a stable and secure installation.

More FAQS
For more FAQs, visit our full FAQ page. We also recommend checking out our Reviews, where many of our customers have answered common questions based on their own experiences with our products.

Specifications

Mounted T-Shaped Partition Wall With Doors

$3,099 Free Shipping | 2-3 weeks
/
The T-Shaped Kit consists of a single wall down the middle, connected to a wall that spans the width of your space, and includes two easy-to-install accordion doors.
Height
Width (door side)
Depth

Need a custom size?

  • 2 Year Guarantee
  • Free Shipping
  • DIY Assembly
  • Semi-Permanent

DIY ASSEMBLY

Assemble and install in as little as an hour with minimal tools

FLEXIBILITY

Modular, flexible, and only as permanent as you want it to be

For the first time ever, you can easily convert a single space into three distinctly separate rooms, with our exclusive T-Shaped Partition Wall With Door kit. The T-Shaped Kit consists of a single wall down the middle, connected to a wall that spans the width of your space, and includes two easy-to-install accordion doors. 

Need to create some space, without going through an entire renovation? Look no further. This kit is the perfect way to add value to any space, creating entirely new rooms without undergoing traditional construction or renovations. 

Each section of the partition is mounted to your existing wall using included Wall Mounting Brackets. This makes for three points of contact and keeps the entire system secure. With just two screws needed per bracket, the entire partition is secured and leaves a minimal effect on your existing walls. When the partition is disassembled or uninstalled, the small screw holes are easily patched and painted as though they were never there!

Say goodbye to drywall, dust, noise, and debris, and assemble the space you need today.

Wall Panels

Your kit includes our signature wall panels that are 3" thick and made of Moisture and Impact Resistant Fiberglass. These panels range from sizes 4'x4'-3'x1' and snap together using included connectors for an ultra-secure two-way connection.

Accordion Door Kit (x2)

The included accordion door kit is 36" wide, and either 84" or 96" in height, depending on the height of the partition you purchase. The kit comes with a specialized lintel, that includes a track for the accordion door. Simply slot the folding door into the track and install it between two panels, locking the lintel and door into place using the lug or 2-way connectors. Each door includes two thresholds, a double-sided handle, and three integrated magnets to hold the door in position when closed.

Wall Mounting Brackets 

The Wall Mounting Brackets make it easy to anchor the partition to your existing walls keeping the entire partition safely secured. When removed, the only marks left on your walls are the small holes from the screws, allowing for easy filling and painting.

To mount, screw the bracket to the fixed wall, nest the panel inside the L, and screw the bracket to the panel. Detailed instructions on this can be found in the "Assembly" tab above.

Lug and 2-Way Connectors

Included connectors are easily snapped into the panels, creating an ultra-secure connection between panels from all sides. These connectors allow you to connect panels to each other in seconds, making for easy assembly. 

Finishing Caps

Finishing caps are used to close off any exposed connector holes, giving the exterior of your wall a clean, finished look! Every kit includes enough caps to seal off the exposed perimeter of your wall. Finishing caps for the top are not included. Extra finishing caps can be added from our Accessories page.

Because this model is attached on both sides to your existing walls, you'll want to measure your space.

1. Ceiling height: Your ceiling should be at least 2 inches higher than the height of the wall you're purchasing.

For example, the minimum ceiling height for the 8' wall to be assembled comfortably is 8'2". Do not try to fit an 8' wall under an 8' ceiling, without a small gap it will be impossible!

2. Wall-to-wall width: The included wall mounting brackets are 3"x3" wide. This gives you around 3" of leeway (1.5" on each side) when it comes to the maximum width of your space from wall-to-wall.

For example, if you're looking at a kit that's 14' wide, the wall-to-wall width of your space should be between 14'-14'3".

3. Floor width: The width of your room along the floor (from the inside of the baseboard on each side) should be no less than the width of the wall you're purchasing.

For example, if you're looking at a kit that is 14' wide, from baseboard-to-baseboard should be no less than 14'.

Do also make sure to check your floor for dips and bulges. Uneven flooring can impact the installation of your product.

Have a question about measurements? Your space doesn't seem to fit any of our available sizes. Contact us, we probably have a custom configuration that works for your space!

Our wall kits are designed to be completely DIY. Two people can typically assemble and install any of our wall kits in 90 minutes or less*, with little to no tools needed. 

Note that a drill and/or screwdriver is recommended for installing the accordion doors and mounting the wall kit to your existing walls. 

If you have any questions regarding assembly feel free to give us a call on (855) 348-4330, email us at hello@diyversify.com or send us a chat right here on our website. We are available Monday-Friday 9AM to 5PM (est).

*Depending on the size of your wall kit

Shipping

Orders ship from local warehouses and are typically delivered in 5-15 business days. After you place your order, you will receive a confirmation email. Once your order is processed and shipped, you will receive tracking info via email.

Our modular wall kits are shipped via freight on a pallet and delivered curbside. You’ll be contacted 1-2 days prior to delivery to schedule a time, and a signature is required.

When the courier arrives, they will lower the pallet to the ground at the curb or driveway, and you’ll be responsible for moving the panels inside and disposing of the packaging and pallet. Accessories may arrive separately as regular parcels.

If you have any questions about shipping (or anything else), feel free to contact us via live chat, phone or email.

*Free shipping available to the Contiguous United States. Excludes Alaska, Hawaii, and U.S. Territories.

Returns
Please see our Return Policy.

Warranty
This product is guaranteed by a Two Year Warranty. 

What is the difference between "Freestanding" and "Mounted" wall kits?
Freestanding Wall Kits stand securely on their own without the need for attachment to your existing walls, leaving no marks when removed. Anchor panels at each end provide stability.

Mounted Wall Kits are secured to your existing walls using the included mounting brackets and a few screws on each end. This option provides maximum stability, making it ideal for more permanent or secure installations.

I don't find my dimensions? Can you do custom orders?
Yes, we offer custom orders with width and depth options in 3-inch increments and height options in 1-foot increments, up to a maximum of 10 feet. Please fill out our Custom Quote Form, and we’ll provide a free custom quote within 24 hours.

Alternatively, you can reach us by email (hello@diyversify.com), chat, or phone at 855-348-4330 for assistance with your custom request.

Can the L-shaped or F-shaped walls turn in any direction?
Yes, our L-shaped and F-shaped wall kits can be connected in any direction, so the layout is fully interchangeable to fit your space.

Can the doors be locked?
The swing doors come with a standard lock and key. The accordion doors do not include locks, but many customers choose to add their own hasp locks for security.

Can I hang pictures or shelves on the walls?
Yes, the panels are stable enough to hang pictures, paintings, and even decorative shelves, making them great for gallery or display walls. You can drill into the panels for mounting screws or use wire loops around lugs at the top of the wall. However, we recommend avoiding heavy items or anything that projects too far from the wall, as this could create a weight imbalance.

Can I choose where the door is placed?
By default, doors are placed in the most economical position. If you have a preference, let us know, and we can check if it’s possible with your dimensions or arrange a custom order. Please note, doors need at least 1 foot of wall panel on each side.

Do you offer financing?
Yes, we offer financing through our partner Breadpay. You can learn more and apply here: Financing Options.

How does mounting work?
Our mounted wall kits include 4-foot-long wall mounting channels, which are secured to your existing walls and each end of the Diyversify walls with a few screws, ensuring a stable and secure installation.

More FAQS
For more FAQs, visit our full FAQ page. We also recommend checking out our Reviews, where many of our customers have answered common questions based on their own experiences with our products.

Specifications

This wall system was the easiest to build. We took a messy unused room and created a useable extra room

Andrew K.

Just got it set up! Perfect for sectioning off our basement. Everything as described. Thanks!

Geoff R.

Easy to assemble and great customer service. The perfect solution if you need a quality room divider.

Matthew P.

The L-shaped partition room divider was the perfect solution! Super easy to install. Looks great for video calls

Jorge L.

Used the L Shaped wall to hide a mailbox area. Super easy to put together. Looks amazing with decal!

Rebecca W.

It's solid and stability is great. It looks great and clean. Thank you for the support when I needed it.

Jetty H.
Read More Reviews

FREE SHIPPING ON ALL ORDERS

Assembly As Easy As

How it Works

The Panels

Each panel consists of two rigid fibreglass composite panels, adhered to a unique interior frame system, forming a lightweight, yet structural wall panel

Order a 1'x1' Sample Panel
Panel Connectors

Interpanel Connectors allow you to attach panels at the top and bottom of each frame, making for an ultra-secure fit.

Vertical Stacking

Patented Lug Connectors make vertical stacking of panels easy, safe, and secure. Simply push connectors into place and attach panels vertically.

Door Kits

The accordion door includes a lintel, handle, and a snap channel to latch it closed. Swing doors are installed just like the modular wall panels using two-way connectors.

Finish the Look

Finishing Caps snap into receiver holes located on all sides of each panel, sealing off the hole and providing a sleek and finished look.

Mounting

Screw the Wall Mounting Bracket to the fixed wall, nest the panel inside the L, and screw the channel to the panel. We recommend utilizing this mounting method if possible

GET A QUOTE

Receive a free, no-obligation quote
within 24 hours

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
J T. (Burnaby, BC)
From 1 room to 2

Very happy with the mounted wall partition which allowed us to convert 1 bedroom to 2. Customer service is top notch and very responsive to all of my questions during our planning process.

Hi Joyce,

Thank you for your awesome review! We're so happy to hear that our Mounted T-Shaped Partition Wall With Doors helped you successfully transform one bedroom into two. It's great to know that our customer service team was able to provide you with the support and answers you needed throughout your planning process. Your satisfaction is our top priority, and we're so thrilled we could be part of your home's transformation.

Best,

Chris

A
Andrew C.
T wall divider review

The product is exactly what we expected and works well for our purposes. We experienced a shipping issue and the support and quick replacement of missing parcels and parts. Upon reviewing the online assembly directions we noticed some extra options for the wall surface that we didn’t consider like wallpaper, seam tape, and additional options for stability. It may be something we just missed upon discovering the wall option but could be helpful to have more in front of you on the website when ordering. Overall we are pleased with this purchase, it offers a sleek and modern option for removable walls

Thanks for the detailed feedback! We're glad to hear the product met your expectations and that you're happy with it overall. We're sorry for any shipping issues you encountered, but pleased that our team was able to resolve it quickly for you. Your suggestions about making options like wallpaper and stability features more visible on our website are valuable, and we'll definitely consider that for future updates. Appreciate your kind words!

D
Dawn R. (Pilot Point, TX)
Space Changing

Our one room business needed separation and Diyversify worked with me to create the perfect option. We now have three work areas and opportunities to offer more.

Great service, support and product!

User picture User picture User picture User picture

Dawn it was such a pleasure getting to work with you on this fun project! A project that really showcased the modularity and flexibility of the wall panels!

Your space looks awesome, and it's great to see how you managed to add in the colors from your brand to really complete the look of your space!

Best,

Chris

A
Angela s. (Alexandria, LA)
Functional and looks nice

Looks much better than I thought it would. Only issue was we didn't get all the parts (caps) but after emailing I had them in two days!

I have a massage/yoga studio and was concerned about the gap along the top but with some fake vines, sheer curtains, and fairy lights it looks amazing. It also feels separate, private, secure, and professional.

Service was excellent and product looks good!

User picture User picture User picture User picture

Thank you for the kind review Angela - your studio looks absolutely amazing! It was a pleasure working with you, and we are so happy to see how great everything turned out!

More Reviews

Trusted By Businesses, Large & Small

⟵ Back to Room Dividers