The Wall Mounted Partition Wall + Door Kit allows you to easily assemble a partition wall divider with an included accordion door, anywhere in your home or business. Whether you need an office, study room, guest bedroom, or just some added privacy, you can assemble your new space quickly and mount it to your existing wall with as little as a drill and a screwdriver. This kit is perfect if you want your partition wall attached to an existing wall, rather than freestanding.

Included Components

Wall Panels

Your kit includes our signature wall panels that are 3" thick, and made of Moisture and Impact Resistant Fiberglass. These panels are easily assembled at home and snap together using lug connectors for a stable and secure fit.

Framed Accordion Door

The EverPanel accordion door is 36" wide by 84" tall and consists of a specialized Lintel piece that includes a track for the accordion door. Simply slot the folding door into the track and install between two EverPanel walls by sliding the door’s lintel over two connector lugs placed into the two wall panels. Each door includes two thresholds, a double sided handle and and integrated magnet to hold the door in position when closed.

Wall Mounting Brackets (x2)

The L-Shaped Wall Bracket makes it easy to mount any Everpanel Wall Kit to existing walls to provide additional structural support. This reduces the cost of the kit, as it weighs less for shipping and requires fewer panels.

Screw the L-Shaped profile to the fixed wall, nest the panel inside the L, and screw the channel to the panel. Detailed instructions on this can be found in the "Assembly" tab above.

Lug Connectors

Your kit includes two-way panel lug connectors, which snap into each panel and make for an ultra-secure two way connection.

Finishing Caps

Finishing caps are used to close off any exposed connector holes, giving the exterior of your wall a clean, finished look! Your kit includes enough caps to seal off the entire perimeter of your wall. For walls above 6'6" in height, finishing caps for the top are not included. Extra finishing caps can be added from our 'accessories' page.

Before you buy, the most important thing to do is measure your ceiling height. Your ceiling must be at least 2" higher than the height of your partition. For example, if you're looking to buy an 8' partition, your ceiling must be at least 8'2". This allows you to assemble the partition comfortably and place it in your space. Without any clearance, you're at risk of not being able to assemble/install the partition at all, which we don't want!

Once you've confirmed your ceiling height, you're good to go.

Returns
This product is covered by our 14 Day Risk-Free Return Policy. If you're not 100% satisfied with your purchase, we'll pick it up and issue a full refund, including shipping costs.

Warranty
This product is guaranteed by a Standard One Year Manufacturer Warranty 

Shipping
Orders ship from Minneapolis and are processed in 9-15 business days. After you place your order, you will receive a confirmation email. Once your order is processed, you will receive tracking info that can be tracked directly from our site. 

1-2 days prior to your delivery, the courier will call you to schedule a time for delivery. You must be home when your delivery is scheduled. 

When the courier arrives, they will meet you at the curb of your building or driveway, and lower the pallet to the ground. Then you can easily transport the wall panels into your home. If you have an extra pair of hands to help, this will only take a couple of minutes.

If you have any questions about shipping (or anything else), feel free to contact us via live chat, phone or email!

What do I need to assemble my Kit?
For assembly, you'll need a drill to attach the Wall Mounting Bracket to your existing wall and to attach the accordion door frame to the panels. No other tools required!

Can I hang art from the panels?
Yes, the panels are strong enough to hang standard pictures and paintings and are perfect for creating gallery walls and displaying your favourite pieces. You can either drill into the panel to place a mounting screw, or you can use wire to hang art using loops placed around lugs/finishing caps inserted in the top of your wall. We do not recommend hanging art that projects far off the wall (such as animal busts) and anything that could create a weight imbalance.

Can I paint or apply wallpaper to the panels?
It is not recommended to paint the panels as the surface is not conducive to painting and is difficult to adhere to. However, it is possible to use standard peel & stick wallpaper to create endless customizations of your wall divider. To avoid seeing seams between panels when applying wallpaper, we recommend applying standard seaming tape between panels before wallpaper is applied.

How are the Kits shipped?
To keep shipping costs as affordable as possible, the Kits are shipped on 48"x40" pallets. When your order is on the way, the courier will call you before your delivery and schedule a 2-4 hour window where you'll be home and able to receive the order. When they arrive, they'll lower the Kit to the ground in front of your driveway, (curbside) where you can begin bringing the panels inside your home. 

I'm renting. Am I allowed to install a Partition Wall in my home?
This all depends on the agreements you have with your landlord. Different counties and landlord boards have different regulations for certain modifications and additions to a home, but we wrote a blog post on the topic to make things as clear as possible! If you're unsure, we recommend contacting your local bylaw office and/or landlord association. 

How are your products priced?
All of our Kits are proudly designed and manufactured in the USA, which ensures top quality but does result in higher costs. However, they are still comparable to or even less than the cost to hire a contractor to build a new wall or room in your home.

Unlike traditional walls, our modular system can be moved, reused, and reconfigured endlessly, providing a lifetime of value no matter where life takes you. 

Why not just build a regular frame wall?
For those who have tools, carpentry expertise, permits, and are ready to make permanent alterations to their home, this may be a better option. However, if you don't have carpentry experience, having a wall built professionally can cost anywhere between $1,900-$4,000, depending on location. In addition, there are often required building plans, permits, cleanup costs and demolition costs if you ever change your mind. If you would rather a modular wall that can be disassembled, repurposed, moved and taken with you, our Kits perfect for you!

Wall Mounted Everpanel L-Shaped Partition Wall + Door Kit

Regular price $1,699.00 Sale price $1,449.00
/
Shipping calculated at checkout.

The Wall Mounted Partition Wall + Door Kit allows you to easily assemble a partition wall divider with an included accordion door, anywhere in your home or business. Whether you need an office, study room, guest bedroom, or just some added privacy, you can assemble your new space quickly and mount it to your existing wall with as little as a drill and a screwdriver. This kit is perfect if you want your partition wall attached to an existing wall, rather than freestanding.

Included Components

Wall Panels

Your kit includes our signature wall panels that are 3" thick, and made of Moisture and Impact Resistant Fiberglass. These panels are easily assembled at home and snap together using lug connectors for a stable and secure fit.

Framed Accordion Door

The EverPanel accordion door is 36" wide by 84" tall and consists of a specialized Lintel piece that includes a track for the accordion door. Simply slot the folding door into the track and install between two EverPanel walls by sliding the door’s lintel over two connector lugs placed into the two wall panels. Each door includes two thresholds, a double sided handle and and integrated magnet to hold the door in position when closed.

Wall Mounting Brackets (x2)

The L-Shaped Wall Bracket makes it easy to mount any Everpanel Wall Kit to existing walls to provide additional structural support. This reduces the cost of the kit, as it weighs less for shipping and requires fewer panels.

Screw the L-Shaped profile to the fixed wall, nest the panel inside the L, and screw the channel to the panel. Detailed instructions on this can be found in the "Assembly" tab above.

Lug Connectors

Your kit includes two-way panel lug connectors, which snap into each panel and make for an ultra-secure two way connection.

Finishing Caps

Finishing caps are used to close off any exposed connector holes, giving the exterior of your wall a clean, finished look! Your kit includes enough caps to seal off the entire perimeter of your wall. For walls above 6'6" in height, finishing caps for the top are not included. Extra finishing caps can be added from our 'accessories' page.

Before you buy, the most important thing to do is measure your ceiling height. Your ceiling must be at least 2" higher than the height of your partition. For example, if you're looking to buy an 8' partition, your ceiling must be at least 8'2". This allows you to assemble the partition comfortably and place it in your space. Without any clearance, you're at risk of not being able to assemble/install the partition at all, which we don't want!

Once you've confirmed your ceiling height, you're good to go.

Returns
This product is covered by our 14 Day Risk-Free Return Policy. If you're not 100% satisfied with your purchase, we'll pick it up and issue a full refund, including shipping costs.

Warranty
This product is guaranteed by a Standard One Year Manufacturer Warranty 

Shipping
Orders ship from Minneapolis and are processed in 9-15 business days. After you place your order, you will receive a confirmation email. Once your order is processed, you will receive tracking info that can be tracked directly from our site. 

1-2 days prior to your delivery, the courier will call you to schedule a time for delivery. You must be home when your delivery is scheduled. 

When the courier arrives, they will meet you at the curb of your building or driveway, and lower the pallet to the ground. Then you can easily transport the wall panels into your home. If you have an extra pair of hands to help, this will only take a couple of minutes.

If you have any questions about shipping (or anything else), feel free to contact us via live chat, phone or email!

What do I need to assemble my Kit?
For assembly, you'll need a drill to attach the Wall Mounting Bracket to your existing wall and to attach the accordion door frame to the panels. No other tools required!

Can I hang art from the panels?
Yes, the panels are strong enough to hang standard pictures and paintings and are perfect for creating gallery walls and displaying your favourite pieces. You can either drill into the panel to place a mounting screw, or you can use wire to hang art using loops placed around lugs/finishing caps inserted in the top of your wall. We do not recommend hanging art that projects far off the wall (such as animal busts) and anything that could create a weight imbalance.

Can I paint or apply wallpaper to the panels?
It is not recommended to paint the panels as the surface is not conducive to painting and is difficult to adhere to. However, it is possible to use standard peel & stick wallpaper to create endless customizations of your wall divider. To avoid seeing seams between panels when applying wallpaper, we recommend applying standard seaming tape between panels before wallpaper is applied.

How are the Kits shipped?
To keep shipping costs as affordable as possible, the Kits are shipped on 48"x40" pallets. When your order is on the way, the courier will call you before your delivery and schedule a 2-4 hour window where you'll be home and able to receive the order. When they arrive, they'll lower the Kit to the ground in front of your driveway, (curbside) where you can begin bringing the panels inside your home. 

I'm renting. Am I allowed to install a Partition Wall in my home?
This all depends on the agreements you have with your landlord. Different counties and landlord boards have different regulations for certain modifications and additions to a home, but we wrote a blog post on the topic to make things as clear as possible! If you're unsure, we recommend contacting your local bylaw office and/or landlord association. 

How are your products priced?
All of our Kits are proudly designed and manufactured in the USA, which ensures top quality but does result in higher costs. However, they are still comparable to or even less than the cost to hire a contractor to build a new wall or room in your home.

Unlike traditional walls, our modular system can be moved, reused, and reconfigured endlessly, providing a lifetime of value no matter where life takes you. 

Why not just build a regular frame wall?
For those who have tools, carpentry expertise, permits, and are ready to make permanent alterations to their home, this may be a better option. However, if you don't have carpentry experience, having a wall built professionally can cost anywhere between $1,900-$4,000, depending on location. In addition, there are often required building plans, permits, cleanup costs and demolition costs if you ever change your mind. If you would rather a modular wall that can be disassembled, repurposed, moved and taken with you, our Kits perfect for you!

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
M.C.
Exactly what my family needed

My mother was diagnosed with cancer and needed to move in with me pretty quickly after. We needed another bedroom in the house but did not want to build a permanent addition. I reached out to Sam and he walked me through all of the options. He kept me up to date about my order and helped me with any concerns I had through out. When the room arrived it only took a few hours to build. It was exactly what we needed. We have a large dresser, full-size bed, tv, and wheelchair with enough room to walk around. I am so grateful for diyversify and Sam.

J
J.A.
Great Product and Even Better Service

Sam did a great job in walking us through the process and was able to answer any question we had.

Throughout the process, (Order - Delivery - Install - Followup) Sam kept in communication and ensured we had what we needed.

We are impressed with the walls we purchased, they are exactly what we needed.

Thanks for the review, Jeremy, your clinic looks amazing! It was a pleasure helping you with your custom order :)

A
A.P.
Love everything

Amazing costumer service and great product!

Thanks for the review Alexandra! Your space looks gorgeous!

Assembly as easy as...

How It Works

The Panel

Each panel consists of two rigid fibreglass composite panels, adhered to a unique interior frame system, forming a lightweight, yet structural wall panel. The panels provide not only strength and durability, but are fire retardant and sound dampening as well.

Panel Connectors

Interpanel Connectors allow you to attach panels at the top and bottom of each frame, making for an ultra-secure fit.

Vertical Stacking

Our patented Lug Connectors make vertical stacking of panels easy, safe, and secure. Simply push connectors into place and attach panels vertically.

Accordion Doors

The accordion door includes a lintel, handle, and a snap channel to latch the door into a closed position. Installation requires a screwdriver.

Finish the Look

Finishing Caps snap into receiver holes located on all sides of each panel, sealing off the hole and providing a sleek and finished look.

Mounting to Existing Walls

Screw the Wall Mounting Bracket to the fixed wall, nest the panel inside the L, and screw the channel to the panel. We recommend utilizing this mounting method when possible (i.e. when a freestanding wall is not necessary).