For the first time ever, you can easily convert a single space into three distinctly separate rooms, with our exclusive Everpanel T-Shaped Partition Wall + Door Kit. The T-Shaped Kit consists of a single wall down the middle, connected to a wall that spans the width of your space and includes two easy-to-install accordion doors. 

Need to create some space, without going through an entire renovation? Look no further. This kit is the perfect way to add value to any space, creating entirely new rooms without having to undergo traditional construction or renovations. 

Each section of the partition is mounted to your existing wall using included Wall Mounting Brackets. This makes for three points of contact and keeps the entire system secure. With just two screws needed per bracket, the entire partition is secured and leaves a minimal effect on your existing walls. When the partition is disassembled or uninstalled, the small screw holes are easily patched and painted, as though they was never there!

Say goodbye to drywall, dust, noise and debris, and assemble the space you need today.

Included Components

Wall Panels

Your kit includes our signature wall panels that are 3" thick, and made of Moisture and Impact Resistant Fiberglass. These panels range from sizes 4'x4'-3'x1', and snap together using included connectors for an ultra secure two-way connection.

Accordion Door Kit (x2)

The included accordion door kit is 36" wide, and either 84" or 96" in height, depending on the height of partition you purchase. The kit comes with a specialized lintel, that includes a track for the accordion door. Simply slot the folding door into the track and install between two panels, locking the lintel and door into place using tthe lug or 2-way connectors. Each door includes two thresholds, a double sided handle and and three integrated magnets to hold the door in position when closed.

Wall Mounting Brackets 

The Wall Mounting Brackets makes it easy to anchor the partition to your existing walls keeping the entire partition safely secured. When removed, the only marks left on your walls are the small holes from the screws, allowing for easy filling and painting.

To mount, screw the bracket to the fixed wall, nest the panel inside the L, and screw the bracket to the panel. Detailed instructions on this can be found in the "Assembly" tab above.

Lug and 2-Way Connectors

Included connectors are easily snapped into the panels, creating an ultra-secure connection between panels from all sides. These connectors allow you to connect panels to each other in seconds, making for easy assembly. 

Finishing Caps

Finishing caps are used to close off any exposed connector holes, giving the exterior of your wall a clean, finished look! Every kit includes enough caps to seal off the exposed perimeter of your wall. Finishing caps for the top are not included. Extra finishing caps can be added from our Accessories page.

 

Because this model is attached on both sides to your existing walls, you'll want to measure your space.

1. Ceiling height: Your ceiling should be at least 2 inches higher than the height of the wall you're purchasing.

For example, the minimum ceiling height for the 8' wall to be assembled comfortably is 8'2". Do not try to fit an 8' wall under an 8' ceiling, without a small gap it will be impossible!

2. Wall-to-wall width: The included wall mounting brackets are 3"x3" wide. This gives you around 2" of leeway (1" on each side) when it comes to the maximum width of your space from wall-to-wall.

For example, if you're looking at a kit that's 14' wide, the wall-to-wall width of your space should be between 14'-14'2".

3. Floor width: The width of your room along the floor (from the inside of the baseboard on each side) should be no less than the width of wall you're purchasing.

For example, if you're looking at a kit that is 14' wide, from baseboard-to-baseboard should be no less than 14'.

Have a question about measurements? Your space doesn't seem to fit any of our available sizes? Contact us, we probably have a custom configuration that works for your space!

 

Everpanel T-Shaped Partition Wall + Door Kit

Regular price $2,399.00
/
Shipping calculated at checkout.

For the first time ever, you can easily convert a single space into three distinctly separate rooms, with our exclusive Everpanel T-Shaped Partition Wall + Door Kit. The T-Shaped Kit consists of a single wall down the middle, connected to a wall that spans the width of your space and includes two easy-to-install accordion doors. 

Need to create some space, without going through an entire renovation? Look no further. This kit is the perfect way to add value to any space, creating entirely new rooms without having to undergo traditional construction or renovations. 

Each section of the partition is mounted to your existing wall using included Wall Mounting Brackets. This makes for three points of contact and keeps the entire system secure. With just two screws needed per bracket, the entire partition is secured and leaves a minimal effect on your existing walls. When the partition is disassembled or uninstalled, the small screw holes are easily patched and painted, as though they was never there!

Say goodbye to drywall, dust, noise and debris, and assemble the space you need today.

Included Components

Wall Panels

Your kit includes our signature wall panels that are 3" thick, and made of Moisture and Impact Resistant Fiberglass. These panels range from sizes 4'x4'-3'x1', and snap together using included connectors for an ultra secure two-way connection.

Accordion Door Kit (x2)

The included accordion door kit is 36" wide, and either 84" or 96" in height, depending on the height of partition you purchase. The kit comes with a specialized lintel, that includes a track for the accordion door. Simply slot the folding door into the track and install between two panels, locking the lintel and door into place using tthe lug or 2-way connectors. Each door includes two thresholds, a double sided handle and and three integrated magnets to hold the door in position when closed.

Wall Mounting Brackets 

The Wall Mounting Brackets makes it easy to anchor the partition to your existing walls keeping the entire partition safely secured. When removed, the only marks left on your walls are the small holes from the screws, allowing for easy filling and painting.

To mount, screw the bracket to the fixed wall, nest the panel inside the L, and screw the bracket to the panel. Detailed instructions on this can be found in the "Assembly" tab above.

Lug and 2-Way Connectors

Included connectors are easily snapped into the panels, creating an ultra-secure connection between panels from all sides. These connectors allow you to connect panels to each other in seconds, making for easy assembly. 

Finishing Caps

Finishing caps are used to close off any exposed connector holes, giving the exterior of your wall a clean, finished look! Every kit includes enough caps to seal off the exposed perimeter of your wall. Finishing caps for the top are not included. Extra finishing caps can be added from our Accessories page.

 

Because this model is attached on both sides to your existing walls, you'll want to measure your space.

1. Ceiling height: Your ceiling should be at least 2 inches higher than the height of the wall you're purchasing.

For example, the minimum ceiling height for the 8' wall to be assembled comfortably is 8'2". Do not try to fit an 8' wall under an 8' ceiling, without a small gap it will be impossible!

2. Wall-to-wall width: The included wall mounting brackets are 3"x3" wide. This gives you around 2" of leeway (1" on each side) when it comes to the maximum width of your space from wall-to-wall.

For example, if you're looking at a kit that's 14' wide, the wall-to-wall width of your space should be between 14'-14'2".

3. Floor width: The width of your room along the floor (from the inside of the baseboard on each side) should be no less than the width of wall you're purchasing.

For example, if you're looking at a kit that is 14' wide, from baseboard-to-baseboard should be no less than 14'.

Have a question about measurements? Your space doesn't seem to fit any of our available sizes? Contact us, we probably have a custom configuration that works for your space!

 

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Assembly as easy as...

How It Works

The Panel

Each panel consists of two rigid fibreglass composite panels, adhered to a unique interior frame system, forming a lightweight, yet structural wall panel. The panels provide not only strength and durability, but are fire retardant and sound dampening as well.

Panel Connectors

Interpanel Connectors allow you to attach panels at the top and bottom of each frame, making for an ultra-secure fit.

Vertical Stacking

Our patented Lug Connectors make vertical stacking of panels easy, safe, and secure. Simply push connectors into place and attach panels vertically.

Accordion Doors

The accordion door includes a lintel, handle, and a snap channel to latch the door into a closed position. Installation requires a screwdriver.

Finish the Look

Finishing Caps snap into receiver holes located on all sides of each panel, sealing off the hole and providing a sleek and finished look.

Mounting to Existing Walls

Screw the Wall Mounting Bracket to the fixed wall, nest the panel inside the L, and screw the channel to the panel. We recommend utilizing this mounting method when possible (i.e. when a freestanding wall is not necessary).