Perfect for making two rooms out of one, the Everpanel Room Divider and Door Kit includes everything you need to assemble a sleek, modern, modular Wall Divider with a door anywhere in your home. To assemble, simply screw the included Wall Mounting Bracket into your existing wall, before nesting the lightweight panels into the bracket. From there, it's as simple as inserting connectors into the receiving holes on each panel, and snapping the panels together like life-sized puzzle pieces!

Need a custom size? Contact Us via live chat, email, or phone!

Included In Every Kit 

Wall + Anchor Panels

Our signature Wall and Anchor Panels are 3 inches thick, and made of Moisture and Impact Resistant Fiberglass. For Wall Dividers over 10' in width, 12" wide anchoring panels are included to provide additional stability around the door. All Wall and Anchor Panels snap together easily using Lug and 2-Way Connectors for a stable and secure fit.

Wall Mounting Brackets (x2)

The Wall Mounting Brackets allow you to easily attach your new Wall Divider to your existing walls. Made of PVC, the bracket is designed to be strong, yet flexible and easy to drill into.  Simply drill two holes through the bracket into your wall, insert the included screws, nest the panels into the corner of the bracket, and add two more screws into the side of your panels. For detailed instructions, see the "assembly" tab above.

Accordion Door Kit

The included EverPanel Accordion Door Kit is 36" wide by 84" tall. The Kit includes the lintel, which snaps into the top of your panels using the finishing caps, as well as a two sided frame. For each side of the frame, simply insert finishing caps into the side of the panels and screw the pieces of the frame into the side of the panels. The Kit also includes a double sided handle, and an integrated magnet to hold the door in position when closed.

For detailed instructions on the door installation, see the "Assembly" tab above.

Lug Connectors

Your kit includes Lug Connectors, which snap into the side of each panel and make for an extremely secure two-way connection between panels.

2-Way Connectors

Panels are held together using Lug Connectors, but also 2-Way Connectors which keep them attached at the top, and bottom. Just like the Lug Connectors and Finishing Caps, these connectors snap securely into the receiving holes found on all Everpanel panels. 

Finishing Caps

Finishing caps are used to close off any exposed connector holes, giving the exterior of your wall a clean, finished look! Your kit includes enough caps to seal off the entire perimeter of your wall. For walls above 6'6" in height, finishing caps for the top are not included, as the top is out of view. Extra finishing caps can be purchased from our 'Accessories' page.

 

Returns

This product is covered by our 14 Day Risk-Free Return Policy. If you're not 100% satisfied with your purchase, we'll pick it up and issue a full refund, including shipping costs.

Warranty

Everpanel products are guaranteed by our Standard One Year Manufacturer Warranty 

Shipping

Orders ship from New York, NY. Orders are processed and shipped within 2-3 business days, and will arrive within 5-9 business days, depending on your location. After you place your order, you will receive a confirmation email. Once your order is processed, you will receive tracking info that can be tracked directly from our site. 

1-2 days prior to your delivery, the courier will call you to schedule a time for delivery. You must be home when your delivery is scheduled. 

When the courier arrives, they will meet you at the curb of your building or driveway, and lower the pallet to the ground. Then you can easily transport the wall panels into your home. If you have an extra pair of hands to help, this will only take a couple of minutes.

What do I need to assemble my Wall Divider Kit?

For assembly, you'll need a drill to attach the Wall Mounting Bracket to your existing wall. To assemble the door, you'll need a screwdriver to attach the accordion door frame to the panels. No other tools required! 

Can I hang art from the panels?
Yes, the panels are strong enough to hang standard pictures and paintings and are perfect for creating gallery walls and art display walls. You can either drill into the panel to place a mounting screw, or you can use wire to hang art using loops placed around lugs/finishing caps inserted in the top of your wall. We do not recommend hanging art that projects far off the wall (such as animal busts) and anything that could create a weight imbalance.

Can I hang art from the panels?
Yes, the panels are strong enough to hang standard pictures and paintings and are perfect for creating gallery walls and art display walls. You can either drill into the panel to place a mounting screw, or you can use wire to hang art using loops placed around lugs/finishing caps inserted in the top of your wall. We do not recommend hanging art that projects far off the wall (such as animal busts) and anything that could create a weight imbalance.

How are the kits shipped?

To keep shipping costs as affordable as possible, the kits are shipped on 48"x40" pallets. When your order is on the way, the courier will call you before your delivery and schedule a 2-4 hour window where you'll be home and able to receive the order. When they arrive, they'll lower the kit to the ground in front of your driveway, (curbside) where you can begin bringing the panels inside your home. 

I'm renting. Am I allowed to install a Wall Divider Kit in my home?

It depends. Different states have different regulations for certain modifications and additions to a home. Some states permit partition walls if they are a certain distance from the ceiling, however every state is different. We recommend contacting your local bylaw office and/or landlord association. 

How are the kits priced?

ALL of our kits are proudly designed and manufactured in the USA, which ensures top quality but does result in higher costs. However, they are still comparable to or even less than the cost to hire a contractor to build a new wall or room in your home. Plus, they're semi-permanent, meaning you can disassemble, move, reuse, or even resell the kit if you ever change your mind! They are made of industrial-grade Moisture and Impact Resistant Fibreglass Reinforced Panels (FRP), bonded to a fire retardant ABS skeleton, incorporating additives for smoke reduction, fire retardancy and additional durability. 

Why not just build a regular frame wall?

For those who have tools, carpentry expertise, permits, and are ready to make permanent alterations to their home, this may be a better option. However, if you don't have carpentry experience, having a wall built professionally can cost anywhere between $1,100-$4,000, depending on location. In addition, there are often required building plans, permits, cleanup costs and demolition costs if you ever change your mind. If you would rather a modular wall that can be disassembled, repurposed, moved and taken with you, our Wall Divider and Room Kits perfect for you!

Wall Mounted Everpanel Partition Wall Divider + Door Kit

Regular price $979.00
/
Shipping calculated at checkout.

Perfect for making two rooms out of one, the Everpanel Room Divider and Door Kit includes everything you need to assemble a sleek, modern, modular Wall Divider with a door anywhere in your home. To assemble, simply screw the included Wall Mounting Bracket into your existing wall, before nesting the lightweight panels into the bracket. From there, it's as simple as inserting connectors into the receiving holes on each panel, and snapping the panels together like life-sized puzzle pieces!

Need a custom size? Contact Us via live chat, email, or phone!

Included In Every Kit 

Wall + Anchor Panels

Our signature Wall and Anchor Panels are 3 inches thick, and made of Moisture and Impact Resistant Fiberglass. For Wall Dividers over 10' in width, 12" wide anchoring panels are included to provide additional stability around the door. All Wall and Anchor Panels snap together easily using Lug and 2-Way Connectors for a stable and secure fit.

Wall Mounting Brackets (x2)

The Wall Mounting Brackets allow you to easily attach your new Wall Divider to your existing walls. Made of PVC, the bracket is designed to be strong, yet flexible and easy to drill into.  Simply drill two holes through the bracket into your wall, insert the included screws, nest the panels into the corner of the bracket, and add two more screws into the side of your panels. For detailed instructions, see the "assembly" tab above.

Accordion Door Kit

The included EverPanel Accordion Door Kit is 36" wide by 84" tall. The Kit includes the lintel, which snaps into the top of your panels using the finishing caps, as well as a two sided frame. For each side of the frame, simply insert finishing caps into the side of the panels and screw the pieces of the frame into the side of the panels. The Kit also includes a double sided handle, and an integrated magnet to hold the door in position when closed.

For detailed instructions on the door installation, see the "Assembly" tab above.

Lug Connectors

Your kit includes Lug Connectors, which snap into the side of each panel and make for an extremely secure two-way connection between panels.

2-Way Connectors

Panels are held together using Lug Connectors, but also 2-Way Connectors which keep them attached at the top, and bottom. Just like the Lug Connectors and Finishing Caps, these connectors snap securely into the receiving holes found on all Everpanel panels. 

Finishing Caps

Finishing caps are used to close off any exposed connector holes, giving the exterior of your wall a clean, finished look! Your kit includes enough caps to seal off the entire perimeter of your wall. For walls above 6'6" in height, finishing caps for the top are not included, as the top is out of view. Extra finishing caps can be purchased from our 'Accessories' page.

 

Returns

This product is covered by our 14 Day Risk-Free Return Policy. If you're not 100% satisfied with your purchase, we'll pick it up and issue a full refund, including shipping costs.

Warranty

Everpanel products are guaranteed by our Standard One Year Manufacturer Warranty 

Shipping

Orders ship from New York, NY. Orders are processed and shipped within 2-3 business days, and will arrive within 5-9 business days, depending on your location. After you place your order, you will receive a confirmation email. Once your order is processed, you will receive tracking info that can be tracked directly from our site. 

1-2 days prior to your delivery, the courier will call you to schedule a time for delivery. You must be home when your delivery is scheduled. 

When the courier arrives, they will meet you at the curb of your building or driveway, and lower the pallet to the ground. Then you can easily transport the wall panels into your home. If you have an extra pair of hands to help, this will only take a couple of minutes.

What do I need to assemble my Wall Divider Kit?

For assembly, you'll need a drill to attach the Wall Mounting Bracket to your existing wall. To assemble the door, you'll need a screwdriver to attach the accordion door frame to the panels. No other tools required! 

Can I hang art from the panels?
Yes, the panels are strong enough to hang standard pictures and paintings and are perfect for creating gallery walls and art display walls. You can either drill into the panel to place a mounting screw, or you can use wire to hang art using loops placed around lugs/finishing caps inserted in the top of your wall. We do not recommend hanging art that projects far off the wall (such as animal busts) and anything that could create a weight imbalance.

Can I hang art from the panels?
Yes, the panels are strong enough to hang standard pictures and paintings and are perfect for creating gallery walls and art display walls. You can either drill into the panel to place a mounting screw, or you can use wire to hang art using loops placed around lugs/finishing caps inserted in the top of your wall. We do not recommend hanging art that projects far off the wall (such as animal busts) and anything that could create a weight imbalance.

How are the kits shipped?

To keep shipping costs as affordable as possible, the kits are shipped on 48"x40" pallets. When your order is on the way, the courier will call you before your delivery and schedule a 2-4 hour window where you'll be home and able to receive the order. When they arrive, they'll lower the kit to the ground in front of your driveway, (curbside) where you can begin bringing the panels inside your home. 

I'm renting. Am I allowed to install a Wall Divider Kit in my home?

It depends. Different states have different regulations for certain modifications and additions to a home. Some states permit partition walls if they are a certain distance from the ceiling, however every state is different. We recommend contacting your local bylaw office and/or landlord association. 

How are the kits priced?

ALL of our kits are proudly designed and manufactured in the USA, which ensures top quality but does result in higher costs. However, they are still comparable to or even less than the cost to hire a contractor to build a new wall or room in your home. Plus, they're semi-permanent, meaning you can disassemble, move, reuse, or even resell the kit if you ever change your mind! They are made of industrial-grade Moisture and Impact Resistant Fibreglass Reinforced Panels (FRP), bonded to a fire retardant ABS skeleton, incorporating additives for smoke reduction, fire retardancy and additional durability. 

Why not just build a regular frame wall?

For those who have tools, carpentry expertise, permits, and are ready to make permanent alterations to their home, this may be a better option. However, if you don't have carpentry experience, having a wall built professionally can cost anywhere between $1,100-$4,000, depending on location. In addition, there are often required building plans, permits, cleanup costs and demolition costs if you ever change your mind. If you would rather a modular wall that can be disassembled, repurposed, moved and taken with you, our Wall Divider and Room Kits perfect for you!

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Assembly as easy as...

How It Works

The Panel

Each panel consists of two rigid fibreglass composite panels, adhered to a unique interior frame system, forming a lightweight, yet structural wall panel. The panels provide not only strength and durability, but are fire retardant and sound dampening as well.

Panel Connectors

Interpanel Connectors allow you to attach panels at the top and bottom of each frame, making for an ultra-secure fit.

Vertical Stacking

Our patented Lug Connectors make vertical stacking of panels easy, safe, and secure. Simply push connectors into place and attach panels vertically.

Accordion Doors

The accordion door includes a lintel, handle, and a snap channel to latch the door into a closed position. Installation requires a screwdriver.

Finish the Look

Finishing Caps snap into receiver holes located on all sides of each panel, sealing off the hole and providing a sleek and finished look.

Mounting to Existing Walls

Screw the Wall Mounting Bracket to the fixed wall, nest the panel inside the L, and screw the channel to the panel. We recommend utilizing this mounting method when possible (i.e. when a freestanding wall is not necessary).