For the first time ever, you can easily convert a single space into three distinctly separate rooms, with our exclusive T-Shaped Partition Wall + Door Kit. The T-Shaped Kit consists of a single wall down the middle, connected to a wall that spans the width of your space, and includes two easy-to-install accordion doors. 

Need to create some space, without going through an entire renovation? Look no further. This kit is the perfect way to add value to any space, creating entirely new rooms without having to undergo traditional construction or renovations. 

Each section of the partition is mounted to your existing wall using included Wall Mounting Brackets. This makes for three points of contact and keeps the entire system secure. With just two screws needed per bracket, the entire partition is secured and leaves a minimal effect on your existing walls. When the partition is disassembled or uninstalled, the small screw holes are easily patched and painted, as though they were never there!

Say goodbye to drywall, dust, noise, and debris, and assemble the space you need today.

Wall Panels

Your kit includes our signature wall panels that are 3" thick and made of Moisture and Impact Resistant Fiberglass. These panels range from sizes 4'x4'-3'x1' and snap together using included connectors for an ultra-secure two-way connection.

Accordion Door Kit (x2)

The included accordion door kit is 36" wide, and either 84" or 96" in height, depending on the height of the partition you purchase. The kit comes with a specialized lintel, that includes a track for the accordion door. Simply slot the folding door into the track and install it between two panels, locking the lintel and door into place using the lug or 2-way connectors. Each door includes two thresholds, a double-sided handle, and three integrated magnets to hold the door in position when closed.

Wall Mounting Brackets 

The Wall Mounting Brackets make it easy to anchor the partition to your existing walls keeping the entire partition safely secured. When removed, the only marks left on your walls are the small holes from the screws, allowing for easy filling and painting.

To mount, screw the bracket to the fixed wall, nest the panel inside the L, and screw the bracket to the panel. Detailed instructions on this can be found in the "Assembly" tab above.

Lug and 2-Way Connectors

Included connectors are easily snapped into the panels, creating an ultra-secure connection between panels from all sides. These connectors allow you to connect panels to each other in seconds, making for easy assembly. 

Finishing Caps

Finishing caps are used to close off any exposed connector holes, giving the exterior of your wall a clean, finished look! Every kit includes enough caps to seal off the exposed perimeter of your wall. Finishing caps for the top are not included. Extra finishing caps can be added from our Accessories page.

Because this model is attached on both sides to your existing walls, you'll want to measure your space.

1. Ceiling height: Your ceiling should be at least 2 inches higher than the height of the wall you're purchasing.

For example, the minimum ceiling height for the 8' wall to be assembled comfortably is 8'2". Do not try to fit an 8' wall under an 8' ceiling, without a small gap it will be impossible!

2. Wall-to-wall width: The included wall mounting brackets are 3"x3" wide. This gives you around 2" of leeway (1" on each side) when it comes to the maximum width of your space from wall-to-wall.

For example, if you're looking at a kit that's 14' wide, the wall-to-wall width of your space should be between 14'-14'2".

3. Floor width: The width of your room along the floor (from the inside of the baseboard on each side) should be no less than the width of the wall you're purchasing.

For example, if you're looking at a kit that is 14' wide, from baseboard-to-baseboard should be no less than 14'.

Have a question about measurements? Your space doesn't seem to fit any of our available sizes? Contact us, we probably have a custom configuration that works for your space!

 

Shipping
Orders ship from Minneapolis and are typically delivered in 9-15 business days. After you place your order, you will receive a confirmation email. Once your order is processed and shipped, you will receive tracking info via email.

1-2 days prior to your delivery, the courier will call you to schedule a time for delivery. You must be home when your delivery is scheduled. 

When the courier arrives, they will meet you at the curb of your building or driveway, and lower the pallet to the ground. Then you can easily transport the wall panels into your home. If you have an extra pair of hands to help, this will only take a couple of minutes.

If you have any questions about shipping (or anything else), feel free to contact us via live chat, phone or email!

Returns
Please see our Return Policy.

Warranty
This product is guaranteed by a Two Year Warranty

What do I need to assemble my Kit?
For assembly, you'll need a drill and screwdriver to attach the Wall Mounting Bracket to your existing wall and to attach the accordion door frame to the panels. No other tools required!

Can I hang art from the panels?
Yes, the panels are strong enough to hang standard pictures and paintings and are perfect for creating gallery walls and displaying your favourite pieces. You can either drill into the panel to place a mounting screw, or you can use wire to hang art using loops placed around lugs/finishing caps inserted in the top of your wall. We do not recommend hanging art that projects far off the wall (such as animal busts) and anything that could create a weight imbalance.

Can I paint or apply wallpaper to the panels?
It is not recommended to paint the panels as the surface is not conducive to painting and is difficult to adhere to. However, it is possible to use standard peel & stick wallpaper to create endless customizations of your wall divider. To avoid seeing seams between panels when applying wallpaper, we recommend applying standard seaming tape between panels before wallpaper is applied.

I have trim/baseboards along my wall. Can I still mount to my existing walls?
Yes! Our wall mounting brackets measure 3"x3", so as long as your trim/baseboards are no wider than 1" you can still use our wall mounting brackets to mount the walls. Just note that you will have a gap the size of your trim/baseboard between your existing walls and your new Diyversify walls. 

Can the walls be installed on carpet floors?
Yes, as long as it is not a high-pile carpet. Any of our wall-mounted wall kits can easily be installed on low-medium pile carpets as long as there are no major dips or bulges in the floor, and you make sure to mount the walls to your existing walls. 

How are the Kits shipped?
In order to provide free shipping the Wall Kits are shipped on 48"x40" pallets. When your order has arrived at your local distrubition center, the courier will typically call you a day in advance to schedule a 2-4 hour window where you'll be home and able to receive the order. When they arrive, they'll lower the Kit to the ground in front of your driveway, (curbside) where you can begin bringing the panels inside your home. Note that you are responsible for disposing of the packaging as well as the pallet.

I'm renting. Am I allowed to install a Partition Wall in my home?
This all depends on the agreements you have with your landlord. Different counties and landlord boards have different regulations for certain modifications and additions to a home, but we wrote a blog post on the topic to make things as clear as possible! If you're unsure, we recommend contacting your local bylaw office and/or landlord association. 

How are your products priced?
All of our Kits are proudly designed and manufactured in the USA, which ensures top quality but does result in higher costs. However, they are still comparable to or even less than the cost to hire a contractor to build a new wall or room in your home.

Unlike traditional walls, our modular system can be moved, reused, and reconfigured endlessly, providing a lifetime of value no matter where life takes you. 

Why not just build a regular frame wall?
For those who have tools, carpentry expertise, permits, and are ready to make permanent alterations to their home, this may be a better option. However, if you don't have carpentry experience, having a wall built professionally can cost anywhere between $1,900-$4,000, depending on location. In addition, there are often required building plans, permits, cleanup costs and demolition costs if you ever change your mind. If you would rather a modular wall that can be disassembled, repurposed, moved and taken with you, our Kits perfect for you!

DIY installation
Our wall kits are designed to be completely DIY. Two people can typically assemble and install any of our wall kits in 90 minutes or less, with little to no tools needed.

Note that a drill and/or screwdiver is recommended for installing the accordion doors and mounting the wall kit to your existing walls. 

Assembly Guides

T-Shaped Partition Wall + Door Kit

Regular price £1,996.00
/
Tax included. FREE shipping - 2-3 weeks

For the first time ever, you can easily convert a single space into three distinctly separate rooms, with our exclusive T-Shaped Partition Wall + Door Kit. The T-Shaped Kit consists of a single wall down the middle, connected to a wall that spans the width of your space, and includes two easy-to-install accordion doors. 

Need to create some space, without going through an entire renovation? Look no further. This kit is the perfect way to add value to any space, creating entirely new rooms without having to undergo traditional construction or renovations. 

Each section of the partition is mounted to your existing wall using included Wall Mounting Brackets. This makes for three points of contact and keeps the entire system secure. With just two screws needed per bracket, the entire partition is secured and leaves a minimal effect on your existing walls. When the partition is disassembled or uninstalled, the small screw holes are easily patched and painted, as though they were never there!

Say goodbye to drywall, dust, noise, and debris, and assemble the space you need today.

Wall Panels

Your kit includes our signature wall panels that are 3" thick and made of Moisture and Impact Resistant Fiberglass. These panels range from sizes 4'x4'-3'x1' and snap together using included connectors for an ultra-secure two-way connection.

Accordion Door Kit (x2)

The included accordion door kit is 36" wide, and either 84" or 96" in height, depending on the height of the partition you purchase. The kit comes with a specialized lintel, that includes a track for the accordion door. Simply slot the folding door into the track and install it between two panels, locking the lintel and door into place using the lug or 2-way connectors. Each door includes two thresholds, a double-sided handle, and three integrated magnets to hold the door in position when closed.

Wall Mounting Brackets 

The Wall Mounting Brackets make it easy to anchor the partition to your existing walls keeping the entire partition safely secured. When removed, the only marks left on your walls are the small holes from the screws, allowing for easy filling and painting.

To mount, screw the bracket to the fixed wall, nest the panel inside the L, and screw the bracket to the panel. Detailed instructions on this can be found in the "Assembly" tab above.

Lug and 2-Way Connectors

Included connectors are easily snapped into the panels, creating an ultra-secure connection between panels from all sides. These connectors allow you to connect panels to each other in seconds, making for easy assembly. 

Finishing Caps

Finishing caps are used to close off any exposed connector holes, giving the exterior of your wall a clean, finished look! Every kit includes enough caps to seal off the exposed perimeter of your wall. Finishing caps for the top are not included. Extra finishing caps can be added from our Accessories page.

Because this model is attached on both sides to your existing walls, you'll want to measure your space.

1. Ceiling height: Your ceiling should be at least 2 inches higher than the height of the wall you're purchasing.

For example, the minimum ceiling height for the 8' wall to be assembled comfortably is 8'2". Do not try to fit an 8' wall under an 8' ceiling, without a small gap it will be impossible!

2. Wall-to-wall width: The included wall mounting brackets are 3"x3" wide. This gives you around 2" of leeway (1" on each side) when it comes to the maximum width of your space from wall-to-wall.

For example, if you're looking at a kit that's 14' wide, the wall-to-wall width of your space should be between 14'-14'2".

3. Floor width: The width of your room along the floor (from the inside of the baseboard on each side) should be no less than the width of the wall you're purchasing.

For example, if you're looking at a kit that is 14' wide, from baseboard-to-baseboard should be no less than 14'.

Have a question about measurements? Your space doesn't seem to fit any of our available sizes? Contact us, we probably have a custom configuration that works for your space!

 

Shipping
Orders ship from Minneapolis and are typically delivered in 9-15 business days. After you place your order, you will receive a confirmation email. Once your order is processed and shipped, you will receive tracking info via email.

1-2 days prior to your delivery, the courier will call you to schedule a time for delivery. You must be home when your delivery is scheduled. 

When the courier arrives, they will meet you at the curb of your building or driveway, and lower the pallet to the ground. Then you can easily transport the wall panels into your home. If you have an extra pair of hands to help, this will only take a couple of minutes.

If you have any questions about shipping (or anything else), feel free to contact us via live chat, phone or email!

Returns
Please see our Return Policy.

Warranty
This product is guaranteed by a Two Year Warranty

What do I need to assemble my Kit?
For assembly, you'll need a drill and screwdriver to attach the Wall Mounting Bracket to your existing wall and to attach the accordion door frame to the panels. No other tools required!

Can I hang art from the panels?
Yes, the panels are strong enough to hang standard pictures and paintings and are perfect for creating gallery walls and displaying your favourite pieces. You can either drill into the panel to place a mounting screw, or you can use wire to hang art using loops placed around lugs/finishing caps inserted in the top of your wall. We do not recommend hanging art that projects far off the wall (such as animal busts) and anything that could create a weight imbalance.

Can I paint or apply wallpaper to the panels?
It is not recommended to paint the panels as the surface is not conducive to painting and is difficult to adhere to. However, it is possible to use standard peel & stick wallpaper to create endless customizations of your wall divider. To avoid seeing seams between panels when applying wallpaper, we recommend applying standard seaming tape between panels before wallpaper is applied.

I have trim/baseboards along my wall. Can I still mount to my existing walls?
Yes! Our wall mounting brackets measure 3"x3", so as long as your trim/baseboards are no wider than 1" you can still use our wall mounting brackets to mount the walls. Just note that you will have a gap the size of your trim/baseboard between your existing walls and your new Diyversify walls. 

Can the walls be installed on carpet floors?
Yes, as long as it is not a high-pile carpet. Any of our wall-mounted wall kits can easily be installed on low-medium pile carpets as long as there are no major dips or bulges in the floor, and you make sure to mount the walls to your existing walls. 

How are the Kits shipped?
In order to provide free shipping the Wall Kits are shipped on 48"x40" pallets. When your order has arrived at your local distrubition center, the courier will typically call you a day in advance to schedule a 2-4 hour window where you'll be home and able to receive the order. When they arrive, they'll lower the Kit to the ground in front of your driveway, (curbside) where you can begin bringing the panels inside your home. Note that you are responsible for disposing of the packaging as well as the pallet.

I'm renting. Am I allowed to install a Partition Wall in my home?
This all depends on the agreements you have with your landlord. Different counties and landlord boards have different regulations for certain modifications and additions to a home, but we wrote a blog post on the topic to make things as clear as possible! If you're unsure, we recommend contacting your local bylaw office and/or landlord association. 

How are your products priced?
All of our Kits are proudly designed and manufactured in the USA, which ensures top quality but does result in higher costs. However, they are still comparable to or even less than the cost to hire a contractor to build a new wall or room in your home.

Unlike traditional walls, our modular system can be moved, reused, and reconfigured endlessly, providing a lifetime of value no matter where life takes you. 

Why not just build a regular frame wall?
For those who have tools, carpentry expertise, permits, and are ready to make permanent alterations to their home, this may be a better option. However, if you don't have carpentry experience, having a wall built professionally can cost anywhere between $1,900-$4,000, depending on location. In addition, there are often required building plans, permits, cleanup costs and demolition costs if you ever change your mind. If you would rather a modular wall that can be disassembled, repurposed, moved and taken with you, our Kits perfect for you!

DIY installation
Our wall kits are designed to be completely DIY. Two people can typically assemble and install any of our wall kits in 90 minutes or less, with little to no tools needed.

Note that a drill and/or screwdiver is recommended for installing the accordion doors and mounting the wall kit to your existing walls. 

Assembly Guides

Free Shipping
Free shipping with residential delivery included
Semi-permanent
Modular, flexible, and only as permanent as you want it to be
Simple DIY Installation
Assemble and install in as little as an hour with minimal tools
2 Year Quality Guarantee
Backed by a 2-year manufacturers warranty

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Angela s. (Alexandria, LA)
Functional and looks nice

Looks much better than I thought it would. Only issue was we didn't get all the parts (caps) but after emailing I had them in two days!

I have a massage/yoga studio and was concerned about the gap along the top but with some fake vines, sheer curtains, and fairy lights it looks amazing. It also feels separate, private, secure, and professional.

Service was excellent and product looks good!

Thank you for the kind review Angela - your studio looks absolutely amazing! It was a pleasure working with you, and we are so happy to see how great everything turned out!

J
Justin N. (Fairfax, CA)
Top Notch Service Support

We purchased the "Everpanel T-Shaped Partition Wall + Door Kit" to offer our teen daughters some private space. The kit itself assembled without any issues (think: big legos)-- light enough to move around without help. I'm no handyman, so thankfully basic screw-to-wall brackets provided all the support the walls need. The doors are really nice- track sliding glossy hard plastic folding doors that uses magnets to 'close.' Smooth, sturdy handles are a plus.

The real 5-star rating goes to the personalized service support we received from these good folks. Our support rep, Sam, actively checked-in to provide updates on our order status, confirmed our measurements, and even provided installation tips beyond the detailed on-site documents. Again- not even pretending to be a builder, Sam's guidance along the way was super appreciated. I would absolutely recommend diyversify to anyone looking to create new space.

Assembly as easy as...

How It Works

The Panel

Each panel consists of two rigid fibreglass composite panels, adhered to a unique interior frame system, forming a lightweight, yet structural wall panel. The panels provide not only strength and durability, but are fire retardant and sound dampening as well.

Panel Connectors

Interpanel Connectors allow you to attach panels at the top and bottom of each frame, making for an ultra-secure fit.

Vertical Stacking

Our patented Lug Connectors make vertical stacking of panels easy, safe, and secure. Simply push connectors into place and attach panels vertically.

Accordion Doors

The accordion door includes a lintel, handle, and a snap channel to latch the door into a closed position. Installation requires a screwdriver.

Finish the Look

Finishing Caps snap into receiver holes located on all sides of each panel, sealing off the hole and providing a sleek and finished look.

Mounting to Existing Walls

Screw the Wall Mounting Bracket to the fixed wall, nest the panel inside the L, and screw the channel to the panel. We recommend utilizing this mounting method when possible (i.e. when a freestanding wall is not necessary).