desk setup inside L shape door wall kit
Freestanding L-Shaped Partition Wall With Door
bedspace inside everpanel L shaped modular wall
Freestanding L-Shaped Partition Wall With Door
chart showing the CAD drawings and different sizes of various modular L-shaped wall kits
Man opening blinds on door in L shaped everpanel L shaped wall door kit
Freestanding L-Shaped Partition Wall With Door
Freestanding L-Shaped Partition Wall With Door
L shaped white modular white kit
Everpanel L shaped wall door kit with door white

Whether you need a home office, study room, guest bedroom, or just some added privacy, you can have it all with no tools, contractors, or hassle. All panels, connectors, and caps are included, along with the framed accordion door.

The Freestanding L-Shaped Room Kit is only as permanent as you want it to be, with no drilling required! Your new temporary wall is completely freestanding, with 12" wide anchor panels at each open end to keep it stable and secure. The only tool needed is a drill to attach the accordion door to the frame. 

Wall Panels
Your kit includes our signature wall panels 3" thick and made of Moisture and Impact Resistant Fiberglass. These panels are easily assembled at home and snap together using lug connectors for a stable and secure fit.

Framed Accordion Door

The included accordion door kit is 36" wide and either 84" or 96" in height, depending on the height of the wall you purchase. The kit includes a specialized lintel piece with a track that allows the door to be easily assembled, installed, opened, and closed. Simply slot the folding door into the track and install it between two Everpanel panels by sliding the door’s lintel over two connector lugs placed into the two wall panels. Each door includes two thresholds, a double-sided handle, and an integrated magnet to hold the door in position when closed.

Anchor Panels

Anchors at the exposed end of your wall are used for full stabilization. These panels are 12" wide, and span the height of your wall. They are attached to the main framework of your wall with lug and 2-way connectors (see below).

Lug Connectors

Your kit includes two-way panel lug connectors, which snap into each panel and make for an ultra-secure two-way connection.

2-Way Connectors

Panels are held together using Lug Connectors, but also 2-Way Connectors which keep them attached at the top and bottom. Just like the Lug Connectors and Finishing Caps, these connectors snap securely into the receiving holes found on all wall and anchor panels. 

Finishing Caps

Finishing caps are used to close off any exposed connector holes, giving the exterior of your wall a clean, finished look! Your kit includes enough caps to seal off the entire perimeter of your wall. For walls above 6' in height, finishing caps for the top are not included. Extra finishing caps can be purchased from our Accessories.

Before you buy, the most important thing to do is measure your ceiling height. Your ceiling must be at least 2" higher than the height of your partition. For example, if you're looking to buy an 8' partition, your ceiling must be at least 8'2". This allows you to assemble the partition comfortably and place it in your space. Without any clearance, you're at risk of not being able to assemble/install the partition at all, which we don't want! Do also make sure to check your floor for dips and bulges. Uneven flooring can impact the installation of your product.

Once you've confirmed your ceiling height and ensured your floor is level, you're good to go.

Shipping
Orders ship from local warehouses in the US (MN) and UK, and are typically delivered in 9-15 business days. After you place your order, you will receive a confirmation email. Once your order is processed and shipped, you will receive tracking info via email. 

1-2 days prior to your delivery, the courier will call you to schedule a time for delivery. You must be home when your delivery is scheduled. 

When the courier arrives, they will meet you at the curb of your building or driveway, and lower the pallet to the ground. Then you can easily transport the wall panels into your home. If you have an extra pair of hands to help, this will only take a couple of minutes.

If you have any questions about shipping (or anything else), feel free to contact us via live chat, phone or email!

Returns
Please see our Return Policy.

Warranty
This product is guaranteed by a Two Year Warranty

What do I need to assemble my kit?
For assembly, you'll need a drill to attach the accordion door frame to the panels. No other tools required! 

Can I hang art from the panels?
Yes, the panels are strong enough to hang standard pictures and paintings and are perfect for creating gallery walls and displaying your favourite pieces. You can either drill into the panel to place a mounting screw, or you can use wire to hang art using loops placed around lugs/finishing caps inserted in the top of your wall. We do not recommend hanging art that projects far off the wall (such as animal busts) and anything that could create a weight imbalance.

Can I paint or apply wallpaper to the panels?
It is not recommended to paint the panels as the surface is not conducive to painting and is difficult to adhere to. However, it is possible to use standard peel & stick wallpaper to create endless customizations of your wall divider. To avoid seeing seams between panels when applying wallpaper, we recommend applying standard seaming tape between panels before wallpaper is applied.

How is this kit shipped?
To keep shipping costs as affordable as possible, the kits are shipped on 48"x40" pallets. When your order is on the way, the courier will call you before your delivery and schedule a 2-4 hour window where you'll be home and able to receive the order. When they arrive, they'll lower the kit to the ground in front of your driveway, (curbside) where you can begin bringing the panels inside your home. 

I'm renting. Am I allowed to install a Partition Wall in my home?
Because it's freestanding, this partition may be allowed by your landlord. However, every landlord is different and it all depends on your agreement with them. We wrote a blog post on the topic to make things as clear as possible! If you're unsure, we recommend contacting your local bylaw office and/or landlord association. 

How are your products priced?
All of our products are proudly designed and manufactured in the USA, which ensures top quality but does result in higher costs. However, they are still comparable to or even less than the cost to hire a contractor to build a new wall or room in your home.

Unlike traditional walls, our modular system can be moved, reused, and reconfigured endlessly, providing a lifetime of value no matter where life takes you. 

Why not just build a regular frame wall?
For those who have tools, carpentry expertise, permits, and are ready to make permanent alterations to their home, this may be a better option. However, if you don't have carpentry experience, having a wall built professionally can cost anywhere between $1,900-$4,000, depending on location. In addition, there are often required building plans, permits, cleanup costs and demolition costs if you ever change your mind. If you would rather a modular wall that can be disassembled, repurposed, moved and taken with you, our kits perfect for you!

Regular price$1,999 Free Shipping | 2-3 weeks
/
The Freestanding L-shaped Room Kit is only as permanent as you want it to be, with no drilling required and completely freestanding.
Height
Width x Depth
Need a Custom Size? 
  • 2 Year Guarantee
  • Free Shipping
  • DIY Assembly
  • Semi-Permanent

DIY ASSEMBLY

Assemble and install in as little as an hour with minimal tools

FLEXIBILITY

Modular, flexible, and only as permanent as you want it to be

Whether you need a home office, study room, guest bedroom, or just some added privacy, you can have it all with no tools, contractors, or hassle. All panels, connectors, and caps are included, along with the framed accordion door.

The Freestanding L-Shaped Room Kit is only as permanent as you want it to be, with no drilling required! Your new temporary wall is completely freestanding, with 12" wide anchor panels at each open end to keep it stable and secure. The only tool needed is a drill to attach the accordion door to the frame. 

Wall Panels
Your kit includes our signature wall panels 3" thick and made of Moisture and Impact Resistant Fiberglass. These panels are easily assembled at home and snap together using lug connectors for a stable and secure fit.

Framed Accordion Door

The included accordion door kit is 36" wide and either 84" or 96" in height, depending on the height of the wall you purchase. The kit includes a specialized lintel piece with a track that allows the door to be easily assembled, installed, opened, and closed. Simply slot the folding door into the track and install it between two Everpanel panels by sliding the door’s lintel over two connector lugs placed into the two wall panels. Each door includes two thresholds, a double-sided handle, and an integrated magnet to hold the door in position when closed.

Anchor Panels

Anchors at the exposed end of your wall are used for full stabilization. These panels are 12" wide, and span the height of your wall. They are attached to the main framework of your wall with lug and 2-way connectors (see below).

Lug Connectors

Your kit includes two-way panel lug connectors, which snap into each panel and make for an ultra-secure two-way connection.

2-Way Connectors

Panels are held together using Lug Connectors, but also 2-Way Connectors which keep them attached at the top and bottom. Just like the Lug Connectors and Finishing Caps, these connectors snap securely into the receiving holes found on all wall and anchor panels. 

Finishing Caps

Finishing caps are used to close off any exposed connector holes, giving the exterior of your wall a clean, finished look! Your kit includes enough caps to seal off the entire perimeter of your wall. For walls above 6' in height, finishing caps for the top are not included. Extra finishing caps can be purchased from our Accessories.

Before you buy, the most important thing to do is measure your ceiling height. Your ceiling must be at least 2" higher than the height of your partition. For example, if you're looking to buy an 8' partition, your ceiling must be at least 8'2". This allows you to assemble the partition comfortably and place it in your space. Without any clearance, you're at risk of not being able to assemble/install the partition at all, which we don't want! Do also make sure to check your floor for dips and bulges. Uneven flooring can impact the installation of your product.

Once you've confirmed your ceiling height and ensured your floor is level, you're good to go.

Shipping
Orders ship from local warehouses in the US (MN) and UK, and are typically delivered in 9-15 business days. After you place your order, you will receive a confirmation email. Once your order is processed and shipped, you will receive tracking info via email. 

1-2 days prior to your delivery, the courier will call you to schedule a time for delivery. You must be home when your delivery is scheduled. 

When the courier arrives, they will meet you at the curb of your building or driveway, and lower the pallet to the ground. Then you can easily transport the wall panels into your home. If you have an extra pair of hands to help, this will only take a couple of minutes.

If you have any questions about shipping (or anything else), feel free to contact us via live chat, phone or email!

Returns
Please see our Return Policy.

Warranty
This product is guaranteed by a Two Year Warranty

What do I need to assemble my kit?
For assembly, you'll need a drill to attach the accordion door frame to the panels. No other tools required! 

Can I hang art from the panels?
Yes, the panels are strong enough to hang standard pictures and paintings and are perfect for creating gallery walls and displaying your favourite pieces. You can either drill into the panel to place a mounting screw, or you can use wire to hang art using loops placed around lugs/finishing caps inserted in the top of your wall. We do not recommend hanging art that projects far off the wall (such as animal busts) and anything that could create a weight imbalance.

Can I paint or apply wallpaper to the panels?
It is not recommended to paint the panels as the surface is not conducive to painting and is difficult to adhere to. However, it is possible to use standard peel & stick wallpaper to create endless customizations of your wall divider. To avoid seeing seams between panels when applying wallpaper, we recommend applying standard seaming tape between panels before wallpaper is applied.

How is this kit shipped?
To keep shipping costs as affordable as possible, the kits are shipped on 48"x40" pallets. When your order is on the way, the courier will call you before your delivery and schedule a 2-4 hour window where you'll be home and able to receive the order. When they arrive, they'll lower the kit to the ground in front of your driveway, (curbside) where you can begin bringing the panels inside your home. 

I'm renting. Am I allowed to install a Partition Wall in my home?
Because it's freestanding, this partition may be allowed by your landlord. However, every landlord is different and it all depends on your agreement with them. We wrote a blog post on the topic to make things as clear as possible! If you're unsure, we recommend contacting your local bylaw office and/or landlord association. 

How are your products priced?
All of our products are proudly designed and manufactured in the USA, which ensures top quality but does result in higher costs. However, they are still comparable to or even less than the cost to hire a contractor to build a new wall or room in your home.

Unlike traditional walls, our modular system can be moved, reused, and reconfigured endlessly, providing a lifetime of value no matter where life takes you. 

Why not just build a regular frame wall?
For those who have tools, carpentry expertise, permits, and are ready to make permanent alterations to their home, this may be a better option. However, if you don't have carpentry experience, having a wall built professionally can cost anywhere between $1,900-$4,000, depending on location. In addition, there are often required building plans, permits, cleanup costs and demolition costs if you ever change your mind. If you would rather a modular wall that can be disassembled, repurposed, moved and taken with you, our kits perfect for you!

This wall system was the easiest to build. We took a messy unused room and created a useable extra room

Andrew K.

Just got it set up! Perfect for sectioning off our basement. Everything as described. Thanks!

Geoff R.

Easy to assemble and great customer service. The perfect solution if you need a quality room divider.

Matthew P.

The L-shaped partition room divider was the perfect solution! Super easy to install. Looks great for video calls

Jorge L.

Used the L Shaped wall to hide a mailbox area. Super easy to put together. Looks amazing with decal!

Rebecca W.

It's solid and stability is great. It looks great and clean. Thank you for the support when I needed it.

Jetty H.

FREE SHIPPING ON ALL ORDERS

Assembly as easy as

How it Works

The Panels

Each panel consists of two rigid fibreglass composite panels, adhered to a unique interior frame system, forming a lightweight, yet structural wall panel

Order a 1'x1' Sample Panel
Panel Connectors

Interpanel Connectors allow you to attach panels at the top and bottom of each frame, making for an ultra-secure fit.

Vertical Stacking

Patented Lug Connectors make vertical stacking of panels easy, safe, and secure. Simply push connectors into place and attach panels vertically.

Accordion Doors

The accordion door includes a lintel, handle, and a snap channel to latch the door into a closed position. Installation requires a screwdriver.

Finish the Look

Finishing Caps snap into receiver holes located on all sides of each panel, sealing off the hole and providing a sleek and finished look.

Mounting

Screw the Wall Mounting Bracket to the fixed wall, nest the panel inside the L, and screw the channel to the panel. We recommend utilizing this mounting method if possible

Customer Reviews

Based on 6 reviews
50%
(3)
50%
(3)
0%
(0)
0%
(0)
0%
(0)
K
K.
Difficult assembly

The L-shaped free standing room works well but it was much more difficult to put together than the video leads you to believe. We had sections that wouldn’t fit one way and had to rotate them to fit together. Seemed to be imprecise production. The freestanding walls don’t really feel stable so we ended up mounting them with L brackets.

S
Sonia T. (Daly City, CA)
very nice

I like it very much. Looks pretty good.

A
Andree F. (Vaudreuil-Dorion, QC)
More privacy and simple to install!

My son’s fiancée moved in with my son downstairs. We wanted to give them more privacy and didn’t want to have a permanent well and door and we didn’t want to get a contractor to do the work.

This was the perfect solution! Easy and quick to put up!

Thank you so much for your review Andree! We're so happy to hear that you are satisfied with the purchase from us!

M
Mark D. (Wheeling, IL)
Home office setup

I ordered a 7'x7' L-shaped wall with an accordion door. It arrived in a reasonable amount of time (comes as freight, which takes a few days). It assembled easily enough overall. I had to shim one wall due to a dip in my floor. Used a crowbar after tying the walls together (safety!) to slightly raise that wall just enough to slide the shims under. The only issue I had was the lintel (top bracket) for the door was manufactured so it would not align properly. I contacted Sam on a Monday who quickly acknowledged it was a manufacturing defect and got me a replacement by the weekend. That part fit perfectly and I was able to complete the project. The instructions for mounting the lintel state using a finishing cap is acceptable, but in my experience those caps are not designed for the extra space the lintel takes and do not snap securely into place. I used the alternate connecting lugs to better secure the lintel from sliding loose. Also, beware pinching your fingers during assembly as it can be easy to do. I recommend using a plumb level for attaching the anchor panels to the walls to ensure you don't induce a lean, and for aligning the door to the walls so the door closes properly.

Overall the quality is good, service was excellent, assembly was easy.

Thanks for your detailed review, Mark! Our apologies for the defective lintel, there was a bad batch that has since been fixed. We've also updated our instruction manual to ensure the use of 2-way connectors or lug connectors to fasten the door, rather than the finishing caps. Thanks again! -diyversify