Overhead view of T-shaped modular partition wall room divider with doors that separates main room from two smaller rooms in boho living room
Boho living room with large plants and luxury lighting, with a partition wall that divides the living room into three separate rooms
Boho living room with hardwood floors and luxury lighting, with a partition wall that divides the room with accordion doors and white modular wall panels
Mounted T-Shaped Partition Wall With Doors
Mounted T-Shaped Partition Wall With Doors
Mounted T-Shaped Partition Wall With Doors
Mounted T-Shaped Partition Wall With Doors
Mounted T-Shaped Partition Wall With Doors
Mounted T-Shaped Partition Wall With Doors
Mounted T-Shaped Partition Wall With Doors

For the first time ever, you can easily convert a single space into three distinctly separate rooms, with our exclusive T-Shaped Partition Wall With Door kit. The T-Shaped Kit consists of a single wall down the middle, connected to a wall that spans the width of your space, and includes two easy-to-install accordion doors. 

Need to create some space, without going through an entire renovation? Look no further. This kit is the perfect way to add value to any space, creating entirely new rooms without undergoing traditional construction or renovations. 

Each section of the partition is mounted to your existing wall using included Wall Mounting Brackets. This makes for three points of contact and keeps the entire system secure. With just two screws needed per bracket, the entire partition is secured and leaves a minimal effect on your existing walls. When the partition is disassembled or uninstalled, the small screw holes are easily patched and painted, as though they were never there!

Say goodbye to drywall, dust, noise, and debris, and assemble the space you need today.

Wall Panels

Your kit includes our signature wall panels that are 3" thick and made of Moisture and Impact Resistant Fiberglass. These panels range from sizes 4'x4'-3'x1' and snap together using included connectors for an ultra-secure two-way connection.

Accordion Door Kit (x2)

The included accordion door kit is 36" wide, and either 84" or 96" in height, depending on the height of the partition you purchase. The kit comes with a specialized lintel, that includes a track for the accordion door. Simply slot the folding door into the track and install it between two panels, locking the lintel and door into place using the lug or 2-way connectors. Each door includes two thresholds, a double-sided handle, and three integrated magnets to hold the door in position when closed.

Wall Mounting Brackets 

The Wall Mounting Brackets make it easy to anchor the partition to your existing walls keeping the entire partition safely secured. When removed, the only marks left on your walls are the small holes from the screws, allowing for easy filling and painting.

To mount, screw the bracket to the fixed wall, nest the panel inside the L, and screw the bracket to the panel. Detailed instructions on this can be found in the "Assembly" tab above.

Lug and 2-Way Connectors

Included connectors are easily snapped into the panels, creating an ultra-secure connection between panels from all sides. These connectors allow you to connect panels to each other in seconds, making for easy assembly. 

Finishing Caps

Finishing caps are used to close off any exposed connector holes, giving the exterior of your wall a clean, finished look! Every kit includes enough caps to seal off the exposed perimeter of your wall. Finishing caps for the top are not included. Extra finishing caps can be added from our Accessories page.

Because this model is attached on both sides to your existing walls, you'll want to measure your space.

1. Ceiling height: Your ceiling should be at least 2 inches higher than the height of the wall you're purchasing.

For example, the minimum ceiling height for the 8' wall to be assembled comfortably is 8'2". Do not try to fit an 8' wall under an 8' ceiling, without a small gap it will be impossible!

2. Wall-to-wall width: The included wall mounting brackets are 3"x3" wide. This gives you around 2" of leeway (1" on each side) when it comes to the maximum width of your space from wall-to-wall.

For example, if you're looking at a kit that's 14' wide, the wall-to-wall width of your space should be between 14'-14'2".

3. Floor width: The width of your room along the floor (from the inside of the baseboard on each side) should be no less than the width of the wall you're purchasing.

For example, if you're looking at a kit that is 14' wide, from baseboard-to-baseboard should be no less than 14'.

Do also make sure to check your floor for dips and bulges. Uneven flooring can impact the installation of your product.

Have a question about measurements? Your space doesn't seem to fit any of our available sizes? Contact us, we probably have a custom configuration that works for your space!

 

Shipping
Orders ship from local warehouses in the US (MN) and UK, and are typically delivered in 9-15 business days. After you place your order, you will receive a confirmation email. Once your order is processed and shipped, you will receive tracking info via email. 

1-2 days prior to your delivery, the courier will call you to schedule a time for delivery. You must be home when your delivery is scheduled. 

When the courier arrives, they will meet you at the curb of your building or driveway, and lower the pallet to the ground. Then you can easily transport the wall panels into your home. If you have an extra pair of hands to help, this will only take a couple of minutes.

If you have any questions about shipping (or anything else), feel free to contact us via live chat, phone or email!

Returns
Please see our Return Policy.

Warranty
This product is guaranteed by a Two Year Warranty

Regular price$2,799 Free Shipping | 2-3 weeks
/
The T-Shaped Kit consists of a single wall down the middle, connected to a wall that spans the width of your space, and includes two easy-to-install accordion doors.
Width
Depth
Height
Need a Custom Size? 
  • 2 Year Guarantee
  • Free Shipping
  • DIY Assembly
  • Semi-Permanent

DIY ASSEMBLY

Assemble and install in as little as an hour with minimal tools

FLEXIBILITY

Modular, flexible, and only as permanent as you want it to be

For the first time ever, you can easily convert a single space into three distinctly separate rooms, with our exclusive T-Shaped Partition Wall With Door kit. The T-Shaped Kit consists of a single wall down the middle, connected to a wall that spans the width of your space, and includes two easy-to-install accordion doors. 

Need to create some space, without going through an entire renovation? Look no further. This kit is the perfect way to add value to any space, creating entirely new rooms without undergoing traditional construction or renovations. 

Each section of the partition is mounted to your existing wall using included Wall Mounting Brackets. This makes for three points of contact and keeps the entire system secure. With just two screws needed per bracket, the entire partition is secured and leaves a minimal effect on your existing walls. When the partition is disassembled or uninstalled, the small screw holes are easily patched and painted, as though they were never there!

Say goodbye to drywall, dust, noise, and debris, and assemble the space you need today.

Wall Panels

Your kit includes our signature wall panels that are 3" thick and made of Moisture and Impact Resistant Fiberglass. These panels range from sizes 4'x4'-3'x1' and snap together using included connectors for an ultra-secure two-way connection.

Accordion Door Kit (x2)

The included accordion door kit is 36" wide, and either 84" or 96" in height, depending on the height of the partition you purchase. The kit comes with a specialized lintel, that includes a track for the accordion door. Simply slot the folding door into the track and install it between two panels, locking the lintel and door into place using the lug or 2-way connectors. Each door includes two thresholds, a double-sided handle, and three integrated magnets to hold the door in position when closed.

Wall Mounting Brackets 

The Wall Mounting Brackets make it easy to anchor the partition to your existing walls keeping the entire partition safely secured. When removed, the only marks left on your walls are the small holes from the screws, allowing for easy filling and painting.

To mount, screw the bracket to the fixed wall, nest the panel inside the L, and screw the bracket to the panel. Detailed instructions on this can be found in the "Assembly" tab above.

Lug and 2-Way Connectors

Included connectors are easily snapped into the panels, creating an ultra-secure connection between panels from all sides. These connectors allow you to connect panels to each other in seconds, making for easy assembly. 

Finishing Caps

Finishing caps are used to close off any exposed connector holes, giving the exterior of your wall a clean, finished look! Every kit includes enough caps to seal off the exposed perimeter of your wall. Finishing caps for the top are not included. Extra finishing caps can be added from our Accessories page.

Because this model is attached on both sides to your existing walls, you'll want to measure your space.

1. Ceiling height: Your ceiling should be at least 2 inches higher than the height of the wall you're purchasing.

For example, the minimum ceiling height for the 8' wall to be assembled comfortably is 8'2". Do not try to fit an 8' wall under an 8' ceiling, without a small gap it will be impossible!

2. Wall-to-wall width: The included wall mounting brackets are 3"x3" wide. This gives you around 2" of leeway (1" on each side) when it comes to the maximum width of your space from wall-to-wall.

For example, if you're looking at a kit that's 14' wide, the wall-to-wall width of your space should be between 14'-14'2".

3. Floor width: The width of your room along the floor (from the inside of the baseboard on each side) should be no less than the width of the wall you're purchasing.

For example, if you're looking at a kit that is 14' wide, from baseboard-to-baseboard should be no less than 14'.

Do also make sure to check your floor for dips and bulges. Uneven flooring can impact the installation of your product.

Have a question about measurements? Your space doesn't seem to fit any of our available sizes? Contact us, we probably have a custom configuration that works for your space!

 

Shipping
Orders ship from local warehouses in the US (MN) and UK, and are typically delivered in 9-15 business days. After you place your order, you will receive a confirmation email. Once your order is processed and shipped, you will receive tracking info via email. 

1-2 days prior to your delivery, the courier will call you to schedule a time for delivery. You must be home when your delivery is scheduled. 

When the courier arrives, they will meet you at the curb of your building or driveway, and lower the pallet to the ground. Then you can easily transport the wall panels into your home. If you have an extra pair of hands to help, this will only take a couple of minutes.

If you have any questions about shipping (or anything else), feel free to contact us via live chat, phone or email!

Returns
Please see our Return Policy.

Warranty
This product is guaranteed by a Two Year Warranty

This wall system was the easiest to build. We took a messy unused room and created a useable extra room

Andrew K.

Just got it set up! Perfect for sectioning off our basement. Everything as described. Thanks!

Geoff R.

Easy to assemble and great customer service. The perfect solution if you need a quality room divider.

Matthew P.

The L-shaped partition room divider was the perfect solution! Super easy to install. Looks great for video calls

Jorge L.

Used the L Shaped wall to hide a mailbox area. Super easy to put together. Looks amazing with decal!

Rebecca W.

It's solid and stability is great. It looks great and clean. Thank you for the support when I needed it.

Jetty H.

FREE SHIPPING ON ALL ORDERS

Assembly as easy as

How it Works

The Panels

Each panel consists of two rigid fibreglass composite panels, adhered to a unique interior frame system, forming a lightweight, yet structural wall panel

Order a 1'x1' Sample Panel
Panel Connectors

Interpanel Connectors allow you to attach panels at the top and bottom of each frame, making for an ultra-secure fit.

Vertical Stacking

Patented Lug Connectors make vertical stacking of panels easy, safe, and secure. Simply push connectors into place and attach panels vertically.

Accordion Doors

The accordion door includes a lintel, handle, and a snap channel to latch the door into a closed position. Installation requires a screwdriver.

Finish the Look

Finishing Caps snap into receiver holes located on all sides of each panel, sealing off the hole and providing a sleek and finished look.

Mounting

Screw the Wall Mounting Bracket to the fixed wall, nest the panel inside the L, and screw the channel to the panel. We recommend utilizing this mounting method if possible

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Dawn R. (Pilot Point, TX)
Space Changing

Our one room business needed separation and Diyversify worked with me to create the perfect option. We now have three work areas and opportunities to offer more.

Great service, support and product!

Dawn it was such a pleasure getting to work with you on this fun project! A project that really showcased the modularity and flexibility of the wall panels!

Your space looks awesome, and it's great to see how you managed to add in the colors from your brand to really complete the look of your space!

Best,

Chris

A
Angela s. (Alexandria, LA)
Functional and looks nice

Looks much better than I thought it would. Only issue was we didn't get all the parts (caps) but after emailing I had them in two days!

I have a massage/yoga studio and was concerned about the gap along the top but with some fake vines, sheer curtains, and fairy lights it looks amazing. It also feels separate, private, secure, and professional.

Service was excellent and product looks good!

Thank you for the kind review Angela - your studio looks absolutely amazing! It was a pleasure working with you, and we are so happy to see how great everything turned out!

J
Justin N. (Fairfax, CA)
Top Notch Service Support

We purchased the "Everpanel T-Shaped Partition Wall + Door Kit" to offer our teen daughters some private space. The kit itself assembled without any issues (think: big legos)-- light enough to move around without help. I'm no handyman, so thankfully basic screw-to-wall brackets provided all the support the walls need. The doors are really nice- track sliding glossy hard plastic folding doors that uses magnets to 'close.' Smooth, sturdy handles are a plus.

The real 5-star rating goes to the personalized service support we received from these good folks. Our support rep, Sam, actively checked-in to provide updates on our order status, confirmed our measurements, and even provided installation tips beyond the detailed on-site documents. Again- not even pretending to be a builder, Sam's guidance along the way was super appreciated. I would absolutely recommend diyversify to anyone looking to create new space.